Improve the supported Porsche 992.1 Carrera 3.0L intake path with IPD's 74 mm Y-plenum.
Vehicle fitment
IPD's current manufacturer page identifies part 92274-3.0 for the Porsche 911 Carrera 3.0L (992.1) and specifically names Carrera Base, S, GTS, T, and Dakar applications. IPD publishes a 2020–2025 application span on that page. Because model-year labels and body/drivetrain derivatives can overlap generation changes, EuroCustomsPR will confirm the VIN, model, engine, market, and existing intake configuration before fulfillment. This listing must not be applied to the 992.2 GTS or 3.7L Turbo platform without separate manufacturer confirmation.
Key benefits
- Vehicle-specific 74 mm plenum designed for the supported 3.0L Carrera intake system.
- IPD's patented Y-shaped internal layout is intended to improve airflow distribution through the intake tract.
- Designed as a bolt-on component that retains the supported 74 mm throttle-body configuration.
- Can be purchased as an individual airflow upgrade or planned with intake, cooling, exhaust, and calibration work.
Technical specifications
- Manufacturer: IPD Plenums
- Manufacturer part number: 92274-3.0
- Nominal application size: 74 mm
- Engine family: supported Porsche 992.1 Carrera 3.0L applications
- Construction and geometry: IPD vehicle-specific Y-plenum design
- Country of manufacture: United States, according to IPD
IPD publishes performance testing for this product, but numerical output claims are intentionally omitted here until the corresponding vehicle, fuel, hardware, calibration, dyno type, and test conditions are documented.
What is included
- One IPD 74 mm intake plenum, part 92274-3.0.
Confirm the current package hardware and instructions with EuroCustomsPR before fulfillment.
Required and recommended supporting components
The vehicle must have the supported 74 mm intake and throttle-body configuration. Inspect seals, clamps, couplers, and adjacent intake components during installation and replace any worn service items. Intake filters, turbo inlets, charge piping, intercoolers, and ECU calibration may be considered as part of a larger build, but are not automatically required by this listing.
Installation notes
Confirm the exact vehicle and intake layout before disassembly. Work on a cool vehicle, protect sealing surfaces, inspect all connections, follow current Porsche and IPD instructions, and verify that no intake leak or fault is present after installation.
Tuning or coding requirements
IPD presents 92274-3.0 as a bolt-on plenum and does not publish a standalone coding requirement on the reviewed product page. Vehicles with additional airflow, turbocharger, exhaust, fuel, or software changes should have the full configuration reviewed with the calibrator.