do88 Competition Intercooler System — Porsche 911 Carrera (992.1, 2019–2024)

A high-capacity do88 intercooler system for verified 2019–2024 Porsche 911 Carrera 992.1 applications, separated into exact standard-bumper and SportDesign/GTS/Dakar variants.

Vehicle fitment

• 992.1, model years 2019–2024: Carrera, Carrera 4, Carrera S, Carrera 4S, Carrera GTS, Carrera 4 GTS, and Dakar.
• Not manufacturer-listed for 992.1 Carrera T, Turbo/Turbo S, GT3-family models, or any 992.2 application.

Confirm VIN, model year, exact trim, production date, bumper equipment, and option codes before ordering. Vehicles with equipment codes 2D1, 2D4, 2D5, VM2, or VM3 require the SportDesign/GTS/Dakar variant.

Choose the correct bumper variant

• ICM-360-C: standard-bumper application.
• ICM-360-SD: SportDesign, GTS, or Dakar bumper application, including the manufacturer-listed equipment codes above.

Key benefits

• Dedicated do88/Garrett-core intercooler assembly for supported 992.1 Carrera applications.
• Application-specific carbon air guides and installation components.
• Supports either factory or compatible do88 intercooler-pipe interfaces using the correct included hose arrangement.
• Creates a complete thermal-management installation path rather than an isolated universal core.

Technical specifications

• Manufacturer: do88.
• Standard-bumper part number: ICM-360-C.
• SportDesign/GTS/Dakar part number: ICM-360-SD.
• Core supplier identified by do88: Garrett.
• The installation removes the factory cabin noise-generator connection path.

What is included

do88 identifies the intercooler assembly, carbon guides, inlet hoses for factory/do88 pipe interfaces, clamps, seals, brackets, O-rings, and installation hardware. Its shared manual depicts both lower-guide styles while the product is sold as separate bumper-specific SKUs. Confirm the exact dealer BOM for the selected variant before activation and installation.

Required and recommended supporting components

Inspect the factory charge pipes, turbo-outlet and intercooler hoses, clamps, seals, bumper guides, sensor/vacuum routing, and surrounding rear cooling hardware. Before combining this intercooler with TR-310 pipes or do88-kit215ST hoses, verify which included hose positions overlap. do88's manufacturer-validated BIG-310-Cr package is the safer future reference for a combined system.

Installation difficulty and scope

Advanced professional installation is strongly recommended. The work requires substantial rear-body and intake-area disassembly, selection of the correct lower-guide/bumper configuration, intercooler removal and installation, charge-air connection work, reassembly, and fault/leak inspection.

Installation notes

Use the current do88 manual and confirm the exact bumper variant before disassembly. Preserve all sensor, oxygen-sensor-cable, vacuum-line, duct, and spoiler-system routing. The factory cabin noise-generator path is disabled by this installation. Perform a complete charge-air leak check and fault review after reassembly.

Professional installation at EuroCustomsPR

EuroCustomsPR can decode the vehicle equipment, select the correct variant, install the intercooler and guides, inspect the full charge-air path, pressure-check the system, and coordinate related inlets, pipes, cooling, and calibration.

Tuning and coding

do88 does not publish a mandatory tune or coding requirement for the intercooler alone. Review the calibration, datalogging, and thermal objective when it supports a tuned or upgraded-turbo build.

Shipping and lead time

do88's current direct U.S. display is $5,787.83 per variant and includes its stated U.S. taxes/duties. That is not confirmed EuroCustomsPR MSRP/MAP. Structured data reports In Stock but no numerical quantity or lead time. This product is published at do88's current U.S. listed retail. Turn14 freight, variant-specific BOM, inventory, fulfillment source, and timing remain subject to confirmation.

Warranty

do88 publishes a 12-month warranty from invoice date for material and manufacturing defects. Assembly damage, alterations, and external impacts are excluded, and reseller customers initiate claims through the reseller.

Compliance and use notice

do88's terms characterize its performance products as intended for motorsport/racing use and place jurisdictional compliance on the purchaser. Do not make a street-legality or emissions-exemption claim without written product-specific documentation.

Frequently asked questions

Which bumper variant do I need?
Decode the vehicle equipment. Codes 2D1, 2D4, 2D5, VM2, or VM3 require ICM-360-SD.

Does it fit 992.2?
No verified 992.2 application is published.

Does it fit Carrera T?
do88 does not list 992.1 Carrera T.

Does it retain the cabin noise generator?
No. do88 states that the installation removes that connection path.

Can I add TR-310 pipes and kit215 hoses?
Only after the overlapping hose interfaces and exact combined BOM are confirmed.

Related products and future packages

Related products include do88 turbo-inlet hoses, a correctly matched TR-310 pipe variant, induction, and model-specific tuning. A combined cooling/airflow package should follow do88's validated interfaces and avoid duplicate hose positions.

Choose your path

• Parts only: after VIN, bumper-code, variant, BOM, and freight confirmation.
• Installed by EuroCustomsPR: strongly recommended because of the disassembly and system checks.
• Custom build consultation: recommended for tuned, turbo-upgraded, or track-focused vehicles.