SPC Performance 72610 Adjustable Camber Arm Pair — Porsche 911, Boxster, Cayman & 718

A pair of forged 6061-T6 aluminum lower control arms from SPC Performance that adds up to ±2 degrees of on-car camber adjustment to supported Porsche applications while retaining booted ball joints and bonded-rubber bushing isolation.

Confirmed front or rear applications

• 1999–2004 Porsche 911 (996)
• 2005–2011 Porsche 911 (997), excluding GT2 and GT3
• 1997–2004 Porsche Boxster (986)
• 2005–2012 Porsche Boxster (987)
• 2006–2012 Porsche Cayman (987)

Confirmed front-only applications

• 2012–2019 Porsche 911 (991)
• 2013–2016 Porsche Boxster (981)
• 2013–2016 Porsche Cayman (981), excluding GT4
• 2017–2024 Porsche 718 Boxster (982)
• 2017–2024 Porsche 718 Cayman (982)

The pair services one axle. Two pairs are required for four-corner adjustability on applications for which SPC lists both front and rear placement.

Critical fitment boundaries

• Rear placement is excluded on vehicles equipped with the Xenon headlamp option under SPC's current product guidance.
• 997 GT2 and GT3 applications are excluded because the original rear brake-air deflector is not compatible with these arms.
• 981 Cayman GT4 is excluded.
• Vehicles equipped with the taller hydraulic control-arm bushing require the original bushing to be professionally pressed into the SPC arm or a compatible small-clevis trailing-link solution.
• No 2025 application is represented by this listing. Confirm model, chassis, year, axle position, headlamp equipment, bushing type, and brake-air-deflector configuration before ordering.

Features

• Up to ±2 degrees of camber adjustment
• Forged 6061-T6 aluminum construction
• Greaseable and rebuildable booted ball joints
• High-durometer bonded-rubber bushings designed to retain original-equipment NVH behavior
• On-car adjustment using the integrated adjuster
• Provision for the ride-height or Litronic headlamp-angle sensor bracket where applicable

What is included

One matched pair of SPC Performance 72610 adjustable lower control arms with the supplied installation hardware and sensor-bracket components referenced in SPC's current instructions.

Installation and alignment

Professional installation and a complete alignment are required. Bushing fasteners must be tightened at normal ride height, clamping fasteners must be torqued to SPC's current specification after adjustment, and suspension-to-component clearance must be verified before road testing.

Warranty

SPC designates part 72610 for its limited lifetime warranty. Eligibility, professional-installation requirements, exclusions, documentation, and claim handling are governed by SPC Performance's current written warranty terms.